What comes in the PETG sample pack
This sample pack is put together for real-world testing, not shelf display. You get a mixed selection of PETG filament samples so you can compare colour tone, layer appearance and print behaviour on your own machine before committing to full spools. It is a useful option when you need to match a client brief, check translucency, or confirm whether a colour works under indoor lighting versus daylight.
Each sample is intended for short test prints, calibration parts and small presentation pieces. That means you can check bed adhesion, stringing, bridging and surface finish without using a full roll. If you are running a print farm or a small workshop, this saves time and avoids ordering a colour that only looks right online but not on your parts.
- Mixed PETG colours for side-by-side testing
- Suitable for calibration cubes, sample badges and small prototypes
- Handy for colour approval before larger production runs
- Couriered nationwide from Cape Town, with collection available in Epping
Where a sample pack makes the most sense
PETG is widely used where a part needs better toughness than standard hobby filament, with a bit more give than brittle plastics. That makes a sample pack useful for manufacturing teams, product designers, educators and makers who need to compare options before they commit. It also helps when you are printing items that must look clean on a counter top, in a workshop or at a client site.
If you work near the coast in places like Cape Town, Somerset West or Stellenbosch, it helps to test first because humidity and storage conditions can affect print consistency. In busy workshops around Bellville, Parow or Montague Gardens, a sample pack is a simple way to keep material decisions practical and reduce waste.
- Good for prototypes, jigs, fixtures and display pieces
- Useful for colour matching and finish checks
- Suitable for schools, design teams and small production runs
- Handy when you need to compare settings on more than one printer
Printer setup, power and print conditions
This is standard 3D printer filament, so it does not need gas or special installation. You load it like any other filament and use your normal extruder setup, nozzle and slicer settings. A clean filament path matters, and so does a dry storage area. If your workshop is affected by load-shedding, it is worth keeping the printer on stable backup power for longer test runs so your settings stay consistent from one sample to the next.
PETG normally prints well on benchtop FDM printers with a heated bed, and it is often chosen because it balances printability with practical strength. If you are testing on different machines, keep the nozzle and bed settings consistent while you compare colours so you can see whether changes in finish are caused by the material or by the printer itself.
- No gas supply required
- Works with standard FDM 3D printers
- Best used with a heated bed and stable power supply
- Store away from damp areas and direct sun
Care, storage and servicing between prints
Like any filament, PETG performs better when it is kept dry and clean. Store sample lengths or opened spools in a sealed container if you are not using them straight away, especially in humid coastal areas. Avoid leaving filament near open windows, solvent fumes or dusty cutting areas. If the line picks up moisture, you may notice popping, stringing or a rougher surface finish during printing.
For servicing, keep an eye on the feed path, drive gear and nozzle. Wipe dust from the spool edge and check that the filament feeds without snagging. If you are rotating between sample colours, label each piece clearly so you do not mix test results. That is especially useful when several operators are using the same machine, or when parts need to be reprinted later.
- Keep sealed when not in use
- Dry storage helps reduce print defects
- Clean the printer feed path regularly
- Label test pieces so results are easy to compare later
What to check before you order
Before you place an order, check your printer filament diameter, spool compatibility and the print settings you normally use. If you are comparing colours for a client, ask whether the part will be seen under indoor lighting, outdoor light or both. That can change how the finish reads, especially on lighter or translucent shades. If your team is working to a tight deadline, it also helps to know whether you need samples for one printer or several.
We also suggest checking the surface finish you need, since some prints are for visual approval and others must hold up to handling. If you are unsure which colours to test, use the enquiry form on our contact page and tell us what the part is for, the printer type and the finish you want. That makes it easier to advise on a sensible sample mix without wasting material.
- Confirm filament diameter and printer compatibility
- Check whether you need colour, finish or strength testing
- Decide if the samples are for one machine or a full workshop
- Use the enquiry form for material advice before ordering
Collection in Epping or courier to your workshop
Our base is in Epping, Cape Town, and sample packs can be arranged for local collection or couriered nationwide. If you are based in nearby areas such as Bellville, Parow, Claremont, Somerset West or Paarl, collection can be a practical option when you need the samples quickly. For teams further afield, courier packing and job labelling help keep orders neat and traceable.
If your order includes other PETG items later, we can keep the process straightforward with clear communication from enquiry through to dispatch. A sample pack is often the first step, then the larger order follows once the colour and print settings are confirmed. That approach saves time, and it keeps your stock decisions grounded in actual prints rather than guesses.
Key facts
| Material | PETG filament sample pack |
|---|---|
| Use | Colour, finish and print-setting testing |
| Printer type | Standard FDM 3D printers |
| Power needs | No gas required, stable electricity recommended |
| Supply | Collection in Epping or nationwide courier |
| Best for | Prototyping, design approval and small-scale testing |
